This telescopic roller conveyor is the extendable version of the straight roller line. Three nested sections slide inside each other, so the conveyor reaches from a fixed packing bench into a container or truck body and is pulled back to 2.5m when the trailer leaves. Instead of building a fixed line to every dock position, one conveyor covers the whole loading bay and is pushed aside when the bay is used for something else.
The conveyor is gravity driven: boxes and totes are placed on the roller bed and slide down a slight fall to the far end, with no motor, cable or control to maintain. Steel rollers carry cartons and bagged goods; plastic rollers remain available where the product surface must not be marked. Folding support legs with swivel casters let one person set the height at the truck bed, roll the conveyor into position and lock the casters.
Load rating is 50kg per meter, which suits parcel, e-commerce and light manufacturing loading rather than pallet handling. Length runs from 2.5m collapsed to 7.5m extended in the standard three stage build; other lengths and a fourth stage are made to order. Side guide rails can be fitted to keep small parcels tracking on the rollers, and an end stop keeps goods from running off the discharge end.
Typical use is container and truck loading, parcel sorting at the dock, feeding a packing bench from a storage area, and temporary take-away lines during peak season. Because the unit folds down, several conveyors can be stored against a wall when the bay is idle.
Key Features
- Three stage telescopic body, 2.5m collapsed to 7.5m extended in one unit
- Gravity operation: no motor, no wiring, nothing to maintain on a daily basis
- 50kg per meter load rating for parcels, cartons and bagged goods
- Folding support legs with swivel casters set the height at the truck bed
- Steel or plastic rollers chosen to suit the product surface
- Side guide rails and end stop keep small parcels tracking to the discharge end
- Folds to a compact stack that can be stored against a wall when the bay is idle
- Made to order: length, stage count, width, roller type and leg height
Technical Specifications (Standard Version, All Customizable)
| Parameter | Detail |
|---|
| Product Name | Telescopic Flexible Gravity Roller Conveyor |
| Model Number | KTD-RC-T750 |
| Body Type | Three stage telescopic, 2.5m to 7.5m |
| Drive | Gravity, non powered |
| Roller | Steel roller standard, plastic roller optional, 38/50mm |
| Load Capacity | 50kg per meter |
| Effective Width | 500mm or 600mm, customizable |
| Support | Folding legs with swivel casters |
| Option | Side guide rails, end stop, PU coated roller |
| Application | Container and truck loading, parcel sorting, temporary take away lines |
| MOQ / Delivery | 5 channels / 15-20 working days after deposit |
When to Choose the Telescopic Version
Choose the telescopic version when the loading point moves, when the bay handles trailers of different depths through the day, when a fixed line would block the aisle when no vehicle is present, or when the same conveyor has to serve a packing bench and a container door. For a fixed straight run inside the workshop, the standard straight roller line is the lower cost choice.
Notes
Before ordering: confirm container or truck bed height, load per meter, parcel size and the collapsed length you can store; a drawing is issued for approval before production. During use: keep the load within 50kg per meter, extend and retract the sections evenly, lock the casters before loading, and keep the roller axles and the telescopic slides free of grit and packing tape.
Your message must be between 20-3,000 characters!