This stainless steel pipe workbench is the cleanroom version of the standard pipe workstation. The frame runs on 304 stainless steel pipe joined with stainless or die cast aluminium connectors, and the work top is a brushed 304 panel that can be wiped with water, alcohol and cleaning agents without rusting or lifting its finish. It suits food packing rooms, medical device assembly and other areas where an aluminium or plastic coated frame would not pass a washdown or hygiene check.
Load capacity is rated at 300kg evenly distributed, which covers pack cases, motors, pumps and stainless fixtures that would overload a light aluminium bench. The pipe frame takes a lower shelf, a back panel, a pipe-mounted tool rail and a bin bracket, so one bench can be built as a full packing station instead of a bare table.
For ESD sensitive lines the same bench is supplied with a static dissipative work top mat bonded to the stainless top, a grounding stud welded to the frame, and a coiled ground cord with a 1 megohm resistor. The stainless frame itself is conductive, so the whole bench drains charge to the grounding point rather than holding it at the surface.
Mobility is optional: four swivel casters with brakes turn the bench into a movable packing station, while levelling feet keep a fixed bench stable on an uneven floor. Size, height, shelf position and accessory layout are made to order and a 3D drawing is issued for approval before production.
Key Features
- 304 stainless steel pipe frame with stainless or die cast aluminium connectors
- Washdown friendly: brushed stainless top resists water, alcohol and cleaning agents
- 300kg distributed load for packed cases, motors and stainless fixtures
- ESD option: dissipative top mat, welded grounding stud and ground cord
- Lower shelf and back panel convert the bench into a full packing station
- Swivel casters with brakes for a movable station, levelling feet for a fixed one
- Bolt-assembled frame that can be dismantled, re-cut and rebuilt on site
- Made to order: top size, height and accessory layout with 3D drawing approval
Technical Specifications (Standard Version, All Customizable)
| Parameter | Detail |
|---|
| Product Name | 304 Stainless Steel Pipe Workbench |
| Model Number | JJ-GZ13S |
| Frame Material | 304 stainless steel pipe, stainless or die cast aluminium connectors |
| Work Top | Brushed 304 stainless panel, ESD dissipative mat optional |
| Load Capacity | 300kg evenly distributed |
| Size / Height | Made to order |
| Shelf | Lower shelf standard, back panel and tool rail optional |
| Mobility | Swivel casters with brakes or levelling feet |
| Grounding | Welded grounding stud with coiled ground cord (ESD version) |
| Application | Food packing room, cleanroom, medical device and electronics assembly |
| MOQ / Delivery | 5 pcs / within 7 working days after deposit |
When to Choose the Stainless Version
Choose the stainless version where the bench is cleaned with water or chemicals, where hygiene rules exclude aluminium or plastic coated frames, where the load exceeds the 100-120kg rating of the standard pipe bench, or where the work surface must be grounded for ESD control. For a dry workshop with light loads the standard aluminium or PE coated pipe workbench is the lower cost choice.
Notes
Before ordering: confirm work top size, height, shelf and back panel positions, and whether the ESD mat and grounding kit are required; a 3D drawing is issued for approval before production. During use: keep the load within 300kg and evenly distributed, lock the casters before working, wipe the stainless top with a non-chloride cleaner, and check the ground cord and mat resistance at planned intervals in ESD areas.
Your message must be between 20-3,000 characters!