This roller surface pipe workbench is the line feeding version of the standard pipe workbench. The working surface is a roller track instead of a flat panel, so totes, boxes and fixtures roll across the bench to the operator rather than being lifted and dragged, and the bench can be set at the end of a conveyor or between two stations as a transfer and buffer point.
The frame is aluminium alloy tube joined with die cast pipe connectors. Shelves below the roller surface are removable: they lift out on the connector brackets, so the bench can be switched between a two shelf storage station and an open frame that takes taller totes or a mobile trolley parked underneath. Because the frame is bolted rather than welded, the bench can be re-cut, widened or rebuilt after a layout change.
The roller track is a choice of gravity roller or skate wheel, matched to the weight of the container: boxed parts roll on rollers, small bins and trays run better on skate wheel. Slope can be set flat for a transfer station or slightly inclined for gravity feed into or out of the line. Side guide rails keep the container tracking straight on the rollers.
Load capacity is rated at 150kg, covering totes of components plus the shelf load underneath. Levelling feet compensate for an uneven floor, and casters with brakes can be specified when the bench has to be moved between lines.
Key Features
- Roller track working surface in gravity roller or skate wheel to match your container
- Removable lower shelves that lift out to take taller totes or a parked trolley
- Aluminium alloy tube frame with die cast connectors, bolted and re-buildable
- 150kg load capacity for totes plus shelf storage underneath
- Adjustable slope: flat transfer station or inclined gravity feed
- Side guide rails keep containers tracking straight on the rollers
- Levelling feet standard, braking casters optional for a movable bench
- Made to order: surface size, roller type, height and shelf layout to your line
Technical Specifications (Standard Version, All Customizable)
| Parameter | Detail |
|---|
| Product Name | Roller Surface Pipe Workbench |
| Model Number | JJ-GZ13R |
| Frame Material | Aluminium alloy pipe with die cast pipe connectors |
| Working Surface | Gravity roller track or skate wheel track |
| Shelves | Removable lower shelves, count and height customizable |
| Load Capacity | 150kg |
| Slope | Flat or inclined, set with connector brackets |
| Support | Levelling feet standard, braking casters optional |
| Size / Height | Made to order |
| Application | Assembly line feeding, transfer and buffer station, packing bench |
| MOQ / Delivery | 5 pcs / within 7 working days after deposit |
When to Choose the Roller Surface Version
Choose the roller surface version when containers have to move between two stations without being lifted, when the bench sits at the end of a conveyor as a buffer, or when heavy totes make a flat bench tiring to work from. For a plain assembly or packing surface with a fixed top, the standard pipe workbench is the lower cost choice.
Notes
Before ordering: confirm container type and weight, roller or skate wheel preference, required slope, bench size and shelf layout; a 3D drawing is issued for approval before production. During use: keep the load within 150kg, do not roll containers faster than the end stop allows, check that the roller axles and guide rails are clear of packing tape and debris, and lock the casters before loading a movable bench.
Your message must be between 20-3,000 characters!