This double sided ESD lean tube workbench puts two complete assembly stations on one interlocking frame. The centre section carries the shared shelf stack and the two side bays face away from each other, so two operators work back to back without sharing a work surface, tools or power outlets. It is the version to choose when a line is laid out in pairs or when floor space only allows one bench where two people have to work.
The frame is anti-static coated lean tube with a steel core, joined by die cast pipe joints rather than welded. Every joint can be released and re-set, so the bench is changed from a two-operator station into a single wide station, a three-bay chain or a bench with taller legs when the cell layout changes. Because the joints are mechanical, the same tubes and joints stay in service after the change instead of being scrapped.
The work surfaces are ESD anti-static panels with a surface resistance of 10^6 to 10^9 ohm, ANSI/ESD S20.20 compliant, and the frame carries a grounding point so the bench, the shelves and the operators drain to the same earth. Phenolic board, PVC board or stainless sheet can be specified when the surface has to resist solvent, solder or heat.
Load is rated at 400kg across the bench, carried on casters rated 80kg each as standard, with 120kg or 150kg heavy duty casters available where fixtures and instruments are heavier. Each side has its own power strip, tool hanging rail and LED light bracket, and the shared shelf stack can be set single layer, double layer or multi-tier on the tube slots.
Key Features
- Two independent stations on one frame, operators work back to back without sharing a surface
- Interlocking lean tube structure with die cast joints, rebuildable into one wide or a three bay bench
- ESD performance: 10^6-10^9 ohm surface, ANSI/ESD S20.20 compliant, grounded frame
- 400kg load on 80kg casters as standard, 120kg or 150kg heavy duty casters optional
- Shared multi-tier shelf stack for parts, tools and instrument storage between the two bays
- Separate power strip, tool rail and LED bracket for each operator side
- Top material options: ESD panel standard, phenolic, PVC or stainless sheet on request
- Made to order: length, width, working height, shelf clearance and tube colour
Technical Specifications (Standard Version, All Customizable)
| Parameter | Detail |
|---|
| Product Name | Double Sided ESD Lean Tube Workbench |
| Model Number | JJC-WS-K200-ESD |
| Frame Material | Anti-static coated lean tube, steel inner core with PE coating |
| Tabletop | ESD anti-static panel standard, phenolic / PVC / stainless optional |
| ESD Performance | Surface resistance 10^6-10^9 ohm, ANSI/ESD S20.20 compliant |
| Combination Structure | Double sided, centre divider, multi-unit interlinkable |
| Load Capacity | 400kg total, 80kg per caster standard |
| Caster | 80kg casters standard, 120kg / 150kg heavy duty optional |
| Accessory | Power strip, tool hanging rail, LED bracket, parts bins, side baffle |
| Application | Electronics assembly, ESD protected area, lean cell reconfiguration |
| MOQ / Delivery | 1 set / 15-20 working days after deposit |
When to Choose the Double Sided Version
Choose the double sided version when a cell is laid out in operator pairs, when two stations must share one floor footprint, or when the same bench has to serve a build side and an inspection side at once. For single operator stations that are added or moved one at a time, the standard reconfigurable single sided lean tube workbench is the lower cost choice.
Notes
Before ordering: confirm table length and depth per side, working height, shelf clearance and tier count, caster class and whether power and light are needed on both sides; a layout drawing is issued for approval before production. During use: keep the load within 400kg, lock the casters before working, verify the grounding connection and surface resistance at planned intervals, and check that the pipe joints stay tightened after the bench is moved.
Your message must be between 20-3,000 characters!